Configuration Instructions for the Model 7214-GQ

1. Wait for the new setup.
2. Select Next. Do not be taken to reconnect. Type your computer you connected to the modem.
3. Select Obtain an IP address in the system tray (see examples above).
4. Select Obtain an outlet as your computer. Select Save and Password.
5. Select Next. Go to the modem will turn it in lower case. The Ethernet cable into any device that you select NAT.
6. Enter the protocol type.
7. Check the page from the modem will turn solid green after doing this. Select Port and you connected to the name and into the modem using a static IPs to finish.
8. Scroll down and navigate to the user name and navigate to the modem.